Copy rules and apply mitigation profiles
Reuse configurations with rule copying, server profiles, and multi-IP operations while verifying source, targets, and per-address results before testing.
Updated 8/3/20264 min read
Apply a profile
Under Create rule, the profile option lets you select a server template and review its rules before deployment. Confirm that the profile matches the application and that its ports do not conflict with existing rules.
- 01Choose ProfilesOpen the profile alternative in the wizard.
- 02Review the templateInspect types, protocols, ports, and modes.
- 03Deploy and verifyWait for results and inspect the full table.
Related guide: How to create a mitigation rule step by step
Copy between IPs
The copy operation asks for a source IP and one or more destinations. Source rules are validated for each target. Do not copy without knowing which services listen on the selected addresses.
Bulk operations
Select addresses under Network before opening an available bulk action. Review selected count, summary by type or mode, and individual results. A partial response requires checking each IP rather than blindly repeating the operation.
- Selection defines scope
- Do not confuse source and destination
- Limits can differ by server
- Verify each table after the change
Frequently asked questions
Does a profile replace current rules?
Review the wizard summary and resulting table. Do not assume replacement or deduplication unless the interface confirms it.
What if a bulk operation partially fails?
Review results and current tables by IP. Correct only failed targets to avoid duplicating successful changes.